Magnetic separator
The magnetic separator is suitable for wet magnetic separation of magnetite, pyrrhotite, calcined ore, ilmenite and other materials with particle size below 3mm, and is also used for iron removal of coal, non-metallic ore, building materials and other materials. The magnetic system of this series of magnetic separator is made of high-quality ferrite material or composite with rare earth magnetic steel, and the average magnetic induction intensity of the cylinder is 100 ~ 600mT. According to the needs of users, it can provide a variety of different table strength magnetic separators such as down-current, semi-counter-current, counter-current type.
Working principle
After the slurry flows into the tank through the feed box, the ore particles enter the tank in a loose state under the action of the water flow of the feed pipe. In the action of the magnetic field, the magnetic agglomeration of the magnetic particles forms a "magnetic group" or "magnetic chain", "magnetic group" or "magnetic chain" in the pulp by the magnetic force, the magnetic pole movement, and is adsorbed on the cylinder.
Other instructions
Wide application field
For burning coal, casting sand, refractory materials and other industries need to use iron removal operations.
Save resources
It is used to separate the raw ore which is not fully reduced in the closed circuit roasting operation of hematite reduction and return to re-burning.
High grade, low load
Lean iron ore is roughed up after coarse or medium crushing to remove waste rock such as surrounding rock, improve the grade and reduce the load of the next process.
High product quality
It is used in the ceramic industry to remove the mixed iron in the ceramic mud and improve the quality of ceramic products.